Automotive Material Packaging and Standards
Federal standard 751a shows many different types of folds. We can provide a few selected pages for your review.
Flame Out type threads which meet FMVSS 302 can be quoted.
- Materials bagged in heavy duty, clear, vinyl bag.
- Stitch type 101 or 301 meets federal standard 751a.
- Sun Bias certifies that our part #713-000-0057VC now woven 3 oz/yd2 medium gray meets Federal Motor Vehicle Safety Standard 302. Our stock also meets the following seating material specifications: MSJZ 8-20 (Ford), GM2726M (GM), and M9H72A (Chrysler).
Material Specifications for Remay 57Typar. Part Number 713-000 0057.VC (Spunbound Polyester) | ||
Property | ASTM Test Method | Polyester |
Basis Weight | D-3776 | 100 g/m2 or 3 oz/yd2 |
Grab Tensile (MD/TD) | D-1682 | 88/88 lbf; 390/390 N |
Grab Elongation (MD/TD) | D-1682 | 45/50 % |
Trapezoidal Tear Strength (MD/TD) | D-1117 | 34/34 lbf; 150/150 N |
Thickness | D-1117 | 17.7 mils; .45 mm |
This information contained herein is believed to be reliable. All recommendations or suggestions are made without guarantees inasmuch as conditions and methods of commercial use are beyond our control. Properties are typical values and are not specifications unless otherwise stated. | ||
Characteristics | Primary Applications | Other Applications |
|
|
|
Sun Bias stocks a standard 1/8" O.D. Cord.
Sun Bias uses a universal wound spool with 3" O.D. core x 12" long tube x 12" diameter disc for O.E.M. users. Materials are traceable to serial lot numbers on piece goods and products shipped.
Weight ranges from nonwoven polyester 20-500 g/m2; our stock 100 g/m2 or 3 oz/yd2.
Your In-Shop Testing of Our Listings
At Sun Bias, we want our customers to be completely satisfied. Our automotive products meet Federal Motor Vehicle Safety Standard (FMVSS) 302. We are so confident of our products, we actually tell you how to test them. PLEASE NOTE: this test does not meet legal safety standards that are required for lab tests. However, the test lets you see first hand if the our products, or those of our competitors, meet FMVSS 302. (To meet FMVSS 302, materials should burn no faster than 4" per minute.)
1. Cut Sun Bias and competitors listings into equal lengths, approximately 12" long. Hold them in your hand with tongs so that both strips hang down at about 45°. Light with a cigarette lighter or open flame.
CAUTION! The material will drip hot melted plastic materials. Do not touch or bump into them with your hands as the burnt materials drip and stay hot for several minutes after the flame is out. The flame on the burning strips can be blown out. The small flame emits smoke that should not be inhaled.
2. The Sun Bias listing will burn slower compared to others we have tested. At times, our listings seem to self-extinguish, which is proper and normal for fabric that is treated properly.
|
|
Sun Bias, Inc. | E-Mail: Sales@Sunbias.com |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |